ACCESS POINT WIRELESS ZYXEL NWA110AX-EU0102F NEBULAFLEX DUAL RADIO 2X2 802.11A/B/G/N/AC/AX 1775MBPS ,SUPP.POE 17W ANT.INTEGR

Descrizione

ACCESS POINT WIRELESS ZYXEL NWA110AX-EU0102F NEBULAFLEX DUAL RADIO 2X2 802.11A/B/G/N/AC/AX 1775MBPS ,SUPP.POE 17W ANT.INTEGR

Product name
Model: NWA110AX
Description: 802.11ax (WiFi 6) Dual-Radio PoE Access Point

Wireless
Standard: IEEE802.11 ax/ac/n/g/b/a
MIMO: MU-MIMO
Wireless speed:
– 2.4GHz: 575Mbps
– 5GHz: 1200Mbps
Frequency band:
– 2.4 GHz (IEEE 802.11 b/g/n) – Europe (ETSI): 2.412 to 2.472 GHz
– 5 GHz (IEEE 802.11 a/n/ac) – Europe (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 GHz
Bandwidth: 20-, 40- and 80-MHz
Conducted typical transmit output power: EU (2.4GHz/5GHz): 20/22dBm

RF Design
Antenna type: 2×2 MIMO optimized Antenna
MTBF: 635,837
Antenna gain:
– 2.4GHz: Peak Gain 5dBi
– 5GHz: Peak Gain 6dBi
Minimum Receive sensitivity: Min. Rx sensitivity up to -101 dBm

WLAN feature
Band Steering: Yes
WDS/Mesh: Yes (V6.10)
Fast roaming: Pre-authentication, PMK caching and 802.11r/k/v
DCS: Yes
Load balancing: Yes

Security
Wireless Security:
– WEP
– WPA
– WPA2-PSK
– WPA3
Authentication:
– WPA
– WPA2-Enterprise
– EAP
– IEEE 802.1X
– RADIUS authentication
Access management:
– L2-isolation
– MAC filtering

Networking
IPv6: Yes
VLANs: Yes
WMM: Yes
U-APSD: Yes
DiffServ marking: Yes

Management
Operating mode:
– Nebula Cloud managed
– Standalone
ZON Utility:
– Discovery of Zyxel switches, APs and gateways
– Centralized and batch configurations
– IP configuration
– IP renew
– Device factory reset
– Device reboot
– Device locating
– Web GUI access
– Firmware upgrade
– Password configuration
Zyxel Wireless Optimizer:
– WiFi AP planning
– WiFi coverage detection
– Wireless health management
Web UI/ CLI: Yes
SNMP: Yes

Physical Specifications
Item:
– Dimensions (WxDxH)(mm/in.) 180 x 180 x 39 / 7.09 x 7.09 x 1.54
– Weight (g/lb.) 453g/1
Packing:
– Dimensions (WxDxH)(mm/in.) 229 x 216 x 64 / 9.02 x 8.5 x 2.52
– Weight (g/lb.) 770g/1.7
Included accessories:
– Mount plate
– Mounting screws
– power adapter

Physical Interfaces
Ethernet port: 1 x 10/100/1000M LAN
Power:
– PoE (802.3)at: power draw 17 W
– DC input : 12 VDC 1.5A

Environmental Specifications
Operating:
– Temperature 0°C to 50°C/32°F to 122°F
– Humidity 10% to 95% (non-condensing)
Storage:
– Temperature -30°C to 70°C/-22°F to 158°F
– Humidity 10% to 90% (non-condensing)

Certifications
Radio:
– FCC Part 15C
– FCC Part 15E
– ETSI EN 300 328
– EN 301 893
– LP0002
EMC:
– FCC Part 15B
– EN 301 489-1
– EN 301 489-17
– EN55022
– EN55024
– EN61000-3-2/-3
– EN60601-1-2
– BSMI CNS13438
Safety:
– Safety EN 60950-1
– IEC 60950-1
– BSMI CNS14336-1